HP 870 Installation Manual page 23
Unified wired-wlan appliance
Hide thumbs
Also See for 870:
- Command reference manual (136 pages) ,
- Compliance and safety manual (44 pages)
Table of Contents
Advertisement
Figure 21 Connection description
3.
Select the serial port to be used from the Connect using list, and click OK.
Figure 22 Setting the serial port used by the HyperTerminal connection
4.
Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None,
and click OK.
19
Advertisement
Table of Contents
