Installing The Avaya Voice Priority Processor; Required Materials; Locate The Avaya Voice Priority Processor; Install The Avaya Voice Priority Processor - Avaya 3641 Installation, Configuration And Administration

2.

Installing the Avaya Voice Priority Processor

As shown in the system diagram the Avaya Voice Priority Processor is connected to the
Ethernet switch. The specifications covered here allow for great flexibility in physical
placement of the components within stated guidelines.
See the Configuration and Administration for Avaya 3641/3645 Wireless IP Telephones
for information on IP addressing.
This unit must be installed by a service person familiar with the installation of electronic
equipment.
Do not power up the unit before it has been properly grounded to a protective earth. See
Grounding instructions below.
2.1

Required Materials

The following equipment must be provided by the customer.
1. Power Outlet – Must accept Avaya-provided AC adapter.
2. Backboard space – The Avaya Voice Priority Processor is designed to be wall mounted
to ¾" plywood securely screwed to the wall.
3. Screws – Required to mount the Avaya Voice Priority Processor to the wall. Four #8 -
¾" panhead wood screws (or similar device) are required.
4. Cat. 5 Cable – RJ-45 connector at the Avaya Voice Priority Processor. Connection to
Ethernet switch.
2.2

Locate the Avaya Voice Priority Processor

The Avaya Voice Priority Processor measures approximately 4 x 12.5 x 7", and weighs
about five pounds. The unit can be wall mounted, vertically or horizontally, over ¾"
plywood. The AVPP can also be rack-mounted using a rack-mount kit (sold separately).
Locate the Avaya Voice Priority Processor in a space with:
1. Sufficient backboard mounting space (for wall mount) and proximity to the LAN
access device (switched Ethernet hub) and power source.
2. Easy access to the front panel, which is used for cabling.
3. A maximum distance of 325 feet (100 meters) from the Ethernet switch.
2.3

Install the Avaya Voice Priority Processor

The Avaya Voice Priority Processor may be mounted on a rack or to a wall.
Mount the AVPP on a rack
The rack-mount kit is designed for mounting equipment in a standard 19" rack and should
contain the following equipment:
1. Mounting plates – Two for each AVPP to be mounted.
2. Screws – Four rack-mount screws for each AVPP to be mounted.
To rack-mount the Avaya Voice Priority Processor:
Issue 6, January 2011
Installing the AVPP
15