Part C: Handset Administration Tool
1.2
Installing the USB Driver
The USB driver installation allows the Dual Charger to be the communication link between
the handset and the PC. The folder containing the HandsetAdmin file contains the two USB
driver files in a folder called USBDriver. The files are named slnkusb.sys and slnkusb.inf.
1. Find the USB driver files on the PC.
2. Place the Dual Charger on a flat, horizontal surface. Plug the power supply into the
Dual Charger and into an appropriate wall outlet.
3. Plug the USB cable into the Dual Charger and into an available USB port on the PC.
4. Power off an Avaya 3641/3645 Wireless IP Telephone, remove the Battery
Pack (optional), and place the handset in the Charger. If properly seated, the handset
automatically powers up in USB mode and the handset screen displays a USB Mode on
indication.
If the handset is not properly seated in the Dual Charger, the USB connection will
not be made and the Battery Pack will begin charging, and the handset screen
displays a Charging... indication. If this occurs, reseat the handset, check the
connections on the USB cable, and/or remove the Battery Pack and try again.
5.
Microsoft Windows will start the Found New Hardware Wizard. There is no need to
connect to Windows Update, so select No, not this time and click Next.
6. The files need to be installed from a specific location. Select Install from a list or
specific location (Advanced) and click Next.
104
Avaya Voice Priority Processor, Avaya 3641/3645 Wireless IP Telephone, Handset Administration Tool