Ryobi R2-PWWDV-G Original Instructions Manual page 21

13
7. Push the accessories console into the recesses on the back of the high-pressure cleaner (Fig. 13). Screw on
tightly with one of the screws provided (Fig. 13).
NOTE: Tighten the screws by hand.
14
8. Mount the high-pressure hose to
the pistol using an open-end
spanner (size: 17) (Fig. 14).
NOTE: When doing so ensure that the filter screen (Fig. 2/8) has been inserted into the adapter and that it is clean.
Unpacking And Assembling
15
9. Mount the adapter of the quick
connector to the appliance (Fig. 15)
by screwing it on clockwise by
hand until it is finger tight.
21