Connecting A Garden Hose (Not In The Scope Of Delivery) - Ryobi R2-PWWDV-G Original Instructions Manual

High-pressure cleaning

4.5 Connecting a garden hose (not in the scope of delivery)

CAUTION: Danger of material damage! Only connect the high-pressure hose to a garden hose that
is connected to a service water line. Do not vacuum water form pools, barrels, containers and the like.
On the one hand, the water quality would otherwise be insufficient, on the other, it avoids the danger
of the pump running dry or getting blocked. Never connect the high-pressure cleaner to a drinking water
mains without backflow prevention.
21
The garden hose (Fig. 21) has to meet the following requirements:
The industrial water connection (Fig. 21) has to meet the following requirements:
1. First rinse out the garden hose to remove air and any dirt.
2. Close the service water connection.
3. Connect the garden hose with its quick coupling to the adapter on the high-pressure cleaner (Fig. 22).
4. Without turning on the high-pressure cleaner, press the spray button on the pistol until a continual, thin stream
of water comes out.
5. Release the spray button.
6. Proceed as described under Chapter 4.6, "Connecting the appliance plug to the power supply".
26
22