Table of Contents
Advertisement
Wet Vacuuming
5.1 Before wet vacuuming
34
So that you can use the wet/dry vacuum cleaner, the motor protection filter is not permitted to be attached.
Therefore, proceed as follows to ensure that the motor protection filter is not installed or to remove it:
1. If you have not done so already, turn the appliance off and pull the appliance plug form the socket.
2. Release the motor unit from the dirt tank by bending both retaining clips upwards
(Fig. 34, rear retaining clip covered).
3. Take the motor unit up out of the dirt tank.
4. Put the motor unit powerfully onto the dirt tank until you can hear and feel both retaining clips snap into place.
NOTE: It does not matter the direction in which the on/off switch is pointing.
5. If you have not done so already, insert the suction hose into the connecting piece at the motor unit that is
marked with 'VACUUM' (Fig. 36).
34
35
36
Hide quick links:
Advertisement
Table of Contents
