Selecting And Fitting Suction Nozzle - Ryobi R2-PWWDV-G Original Instructions Manual

High-pressure cleaner and wet/dry vacuum
Table of Contents

Advertisement

5.2 Selecting and fitting suction nozzle

37
Proceed as follows to attach the suction nozzles:
WARNING: Danger of injury! Only attach the suction nozzles if the appliance plug is not connected to the
power supply. Otherwise the machine might start up and parts of your body, hair or pieces of clothing
might be sucked in.
CAUTION: Only use undamaged suction nozzles. Defective suction nozzles may scratch or damage
surfaces and objects.
38
NOTE: If required, you can also use the suction tube without any
suction nozzle.
There are three suction nozzles delivered that can be used for certain
cleaning tasks:
have sensitive surfaces.
of dirt when wet and dry vacuuming.
from hard to reach places.
1. If a suction nozzle is still installed, pull it off.
2. Put the desired suction nozzle onto the free end of the suction hose
(Fig. 38).
3. When putting on the suction nozzle, push firmly and rotate back and
forth to ensure it is securely in place.
Wet Vacuuming
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents