Graphic Display Selection - Kenwood KDC-W7037 Instruction Manual

⁄
• To change the information by the Display Type, refer
to the page on the following table for the methods to
alternate by the Display Type.
Display Type A
Graphic 1
11
Status 2
11
Text 3
—
Upper 4
—
Middle 5
—
Lower 6
—
Text 7
—
Display Type A/ Display Type B
Status Setting
Determine whether the On and Off statuses of
various functions are to be displayed on the Display
Type A/B.
1
Enter Status Setting mode
Using the Control knob, select "DISP" >
"STATUS".
For the operation method, refer to <Function
Control mode> (page 10).
2
Select the Status display
Turn the Control knob.
3
Exit Status Setting mode
Press the Control knob.
B C D E
11 — — —
11 — — —
12 — — —
— 12 12 —
— 12 12 —
— 12 12 —
— — — 12
Display Type A/ Display Type B

Graphic Display Selection

Changing the graphic Display.
1
Enter Graphic Display Selection mode
Using the Control knob, select "DISP" >
"GRAPH".
For the operation method, refer to <Function
Control mode> (page 10).
2
Select the graphic display
Turn the Control knob or push it towards left
or right.
Select from the following displays:
Graphic display
Movie 1 – 2
Wallpaper 1 – 6
Wallpaper scan
3
Exit Graphic Display Selection mode
Press the Control knob.
⁄
• The setting of this function is available while "TYPE
SELECT [A]"/ "TYPE SELECT [B]" is selected for the Display
mode.
Display
"SCAN"
|
11
English