Touch Sensor Tone; Manual Clock Adjustment; Dsi (Disabled System Indicator); Switching Graphic Display - Kenwood KRC-435 Instruction Manual

1
Turn the power ON.
2
Do the step 4 through 7 operation, and enter the Security
Code.
"APPROVED" is displayed.
The unit can be used.

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"BEEP ON"
"BEEP OFF"

Manual Clock Adjustment

1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Setting
Beep is heard.
Beep canceled.
— 19 —
Press the [MENU] button.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
Display
"DSI ON"
"DSI OFF"

Switching Graphic Display

Setting the graphic part display ON/OFF.
Display
"GRPH ON"
"GRPH OFF"
Setting
LED flashes.
LED OFF.
Setting
The graphic part is displayed.
The graphic part isn't displayed.