Theft Deterrent Faceplate; External Display Selection - Kenwood KDC-W7037 Instruction Manual

General features

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken
with you, helping to deter theft.
Removing the Faceplate
1
Press the Release button.
Drop open the faceplate.
2
Drawing the faceplate to left side pull it to
forward and remove it.
¤
• The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
1
Align the shaft on the unit with the depression
on the faceplate.
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use
the unit.
|
14
English

External Display Selection

Changing the display in the connected External
Display.
1
Enter External display select mode
Using the Control knob, select "DISP" > "DOUT".
For the operation method, refer to <Function
Control mode> (page 10).
"DISP Out Select" is displayed.
2
Select the display
Turn the Control knob or push it towards left
or right.
Select your desired display.
3
Exit display control mode
Press the Control knob.