Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kenwood KDC-W707
Summary of Contents for Kenwood KDC-W707
- Page 1 CD-RECEIVER KDC-W808 KDC-W707 INSTRUCTION MANUAL © B64-3142-10/01 (EW)
-
Page 2: Table Of Contents
Contents Safety precautions Notes About CDs About AAC, MP3 and WMA General features Power Hiding the Control Panel Selecting the Source Volume Attenuator System Q Speaker Setting Audio Control Audio Setup Subwoofer Output Display Setting Text Selection for Display Text Display Switching Graphic part/ Spectrum Analyzer Display Switching Faceplate Angle Adjustment... - Page 3 Audio Preset Call Selecting Russian Characters Demonstration mode Setting Accessories/ Installation Procedure 40 Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide Specifications The "AAC" logo is trademark of Dolby Laboratories. English...
-
Page 4: Safety Precautions
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. -
Page 5: Notes
• The characters conforming to ISO 8859-5 or ISO 8859-1 character set can be displayed. Refer to <Selecting Russian Characters> (page 38). (Russian sales area of KDC-W707) • There are places in this manual where lit indicators are described; however, the only time an indicator will light is in the following settings. -
Page 6: Laser Product
"Media Manager". • Refer to the following site for updated information of "Media Manager". http://www.kenwood.mediamanager.jp • Contact Kenwood for the function and operation of the "Media Manager". • "Media Manager" is a product of PhatNoise. The marking of products using lasers... -
Page 7: About Cds
About CDs Handling CDs • Do not touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. •... -
Page 8: About Aac, Mp3 And Wma
• Transfer bit rate: 8-320 kbps • Sampling frequency KDC-W808: 16, 22.05, 24, 32, 44.1, 48 kHz KDC-W707: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 Playable WMA file • The file in accordance with Windows Media Audio (Except for the file for Windows Media Player 9 or after which applies the new functions) •... -
Page 9: General Features
General features Power Turning ON the Power Turn the vehicle ignition ON. The control panel appears. Turing OFF the Power Turn the vehicle ignition OFF or press the [SRC] button for at least 1 second. The control panel is hidden. •... -
Page 10: Selecting The Source
General features Selecting the Source Press the [SRC] button. Source required Tuner External disc (Optional accessory) Auxiliary input (KDC-W808 only) Auxiliary input (Optional accessory) Standby (Illumination only mode) • This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicle's battery. -
Page 11: Audio Control
Setup> (page 12) is set to "ON". • * You can control this item when <Switching preout> (page 33) is set to "SWPRE:Sub-W". (KDC-W707 only) • * You can control this item when <Subwoofer Output> (page 12) is set to "SW ON". -
Page 12: Audio Setup
• Loudness: Compensates for low and high tones during low volume. • * You can control this item when <Switching preout> (page 33) is set to "SWPRE:Sub-W". (KDC-W707 only) • * You can control this item when <Subwoofer Output> (page 12) is set to "SW ON". -
Page 13: Display Setting
Display Setting Changing the display mode. Enter display Control mode Press the Control knob for at least 1 second. "Display Control" is displayed. Select the Display mode Press the Control knob. Each time you press the knob, the display alternates between the display modes shown in the table below. -
Page 14: Text Selection For Display
• Album name cannot be displayed in WMA file. (KDC- W707 only) Display • Song title, Artist name, and Album name cannot be "BAND+ch+PS"* displayed in AAC file. (KDC-W707 only) "Radio Text"* Exit Display control mode "BAND+ch+FREQ" Press the Control knob for at least 1 second. -
Page 15: Text Display Switching
• Track number at Audio file displays the last 3 digits when the track number exceeds 1000 songs (KDC- W808 only). • Album name cannot be displayed in WMA file. (KDC- W707 only) • Song title, Artist name, and Album name cannot be displayed in AAC file. (KDC-W707 only) English... - Page 16 General features The text display in the Upper text display part In Tuner source Information Program Service name (FM) Radio text (FM) Frequency (MW, LW) Spectrum Analyzer & Clock Date Displaying the frequency during Program Service name reception Press the [SCRL] button for at least 1 second. The frequency for the RDS station will be displayed for 5 seconds instead of the Program Service name.
- Page 17 • * If the contents of the information cannot be displayed, Kenwood Logo is displayed. English...
-
Page 18: Graphic Part/ Spectrum Analyzer Display
General features The text display in the Lower text display part In Tuner source Information Indicator Spectrum Analyzer & Clock Date Blank Radio text (FM) In CD & External disc source Information Indicator Spectrum Analyzer & Clock Date Blank Disc title Track title Disc name In Audio file source... -
Page 19: Theft Deterrent Faceplate
Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Turn the ignition OFF or press the [SRC] button for at least 1 second. The power turns OFF and the faceplate slides open. -
Page 20: Tuner Features
Tuner features Band display FM1-6ch ST indicator Tuning Selecting the station. Select tuner source Press the [SRC] button. Select the "TUNER" display. Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. -
Page 21: Auto Memory Entry
Auto Memory Entry Putting stations with good reception in the memory automatically. Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM]. Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. -
Page 22: Rds Features
RDS features FM1-6ch KENWOOD Radio Text Traffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio. Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF. -
Page 23: Pty (Program Type)
PTY (Program Type) Selecting the Program Type and searching for a station. Enter PTY mode Press the Control knob. "PTY Select" is displayed. • This function cannot be used during a traffic bulletin or AM reception. Select the Program Type Push the Control knob towards [FM] or [AM]. -
Page 24: Changing Language For Pty Function
RDS features Changing Language for PTY Function Selecting the Program Type display language. Enter PTY mode Refer to <PTY (Program Type)> (page 23). Enter Changing Language mode Press the [TI] button. Select the language Push the Control knob towards [FM] or [AM]. Each time you push the knob, the language alternates between the languages shown in the table below. -
Page 25: Cd/Audio File/External Disc Control Features
CD/Audio file/External disc control features MP3 T-01 Title/Artist Playing CD & Audio file When there is no disc inserted Open the panel Press the [0] button. Insert a disc. • When the faceplate slides open, it might interfere with the shift lever or other vehicle function. If this happens, pay attention to safety and move the shift lever or take an appropriate action to remove the obstacle, then operate the unit. -
Page 26: Playing External Disc
• There is no sound while the Audio file is being searched. • You cannot fast Forwarding and Reversing while AAC file is being played. (KDC-W707 only) • You cannot fast Forwarding and Reversing depending on AAC file format. (KDC-W808 only) -
Page 27: Scan Play
Scan Play Playing the first part of each song on the disc or Audio file folder you are listening to and searching for the song you want to hear. Start Scan Play Press the [SCAN] button. "Scan ON" is displayed. Release the button when the song you want to hear is played Press the [SCAN] button. -
Page 28: Folder Select
CD/Audio file/External disc control features Function of Audio file Folder Select Quickly selecting the folder you want to hear. Enter Folder Select mode Press the [F.SEL] button. "Select Mode" is displayed. During Select mode the folder information is displayed as shown below. Folder number display Displays the number in the folder belonging to the currently selected folder. -
Page 29: Disc Naming (Dnps)
Name Set mode closes. • Media that you can attach a name to - Internal CD player: 10 discs. - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. -
Page 30: Text/Title Scroll
CD/Audio file/External disc control features Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward [FM] for at least 1 second. English... -
Page 31: Menu System
Menu system Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Enter Menu mode Press the [MENU] button for at least 1 second. "Menu"... -
Page 32: Security Code
Menu system In Standby mode Security Code Because authorization by the Security Code is required when the audio unit is removed from the vehicle, personalizing this unit by using the Security Code is helpful in preventing theft. • Setup Security Code when the <Demonstration mode Setting>... -
Page 33: Date Adjustment
Display and Setting "Off Wait:0sec" "Off Wait:3sec" (Original setting) "Off Wait:25sec" Function of the KDC-W707 In Standby mode Switching preout Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.) -
Page 34: Built-In Amp Setting
Menu system In Standby mode Built-in Amp Setting Controlling the built-in amplifier. Turning OFF this control enhances the preout quality. Display Setting "AMP:ON" The built-in amplifier activates. "AMP:OFF" The built-in amplifier deactivates. Other than Standby mode/ When the Dual Zone System is ON Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. -
Page 35: Local Seek
When you set "News:00min" — "News:90min", the News Bulletin Interrupt function is ON. When the News Bulletin is ON, the "News " indicator is ON. When the news bulletin starts, "News " is displayed, and the tuner changes to the news bulletin. -
Page 36: Monaural Reception
Menu system In FM reception Monaural Reception You can reduce the noise when stereo broadcasts are received as monaural. Display Setting "MONO:OFF" The monaural reception is OFF. "MONO:ON" The monaural reception is ON. External Display Control Changing the display of the External Display connected to this unit. -
Page 37: Power Off Timer
In Standby mode Power OFF Timer Setting the timer to turn this unit’s power OFF automatically when Standby mode continues. Using this setting can save the vehicle’s battery power. Display Setting "Power OFF :– – –" Power OFF Timer function is OFF. "Power OFF :20min"... -
Page 38: Audio Preset Memory
• The source tone memory item of <Audio Control> (page 11) is changed to the value which was recalled by the selected source. Function of the KDC-W707 (Russian sales area) In Standby mode Selecting Russian Characters Select Russian as a text display language. -
Page 39: Demonstration Mode Setting
In Standby mode Demonstration mode Setting Sets the demonstration mode. Select the Demonstration mode Push the Control knob towards [FM] or [AM]. Select the "DEMO Mode" display. Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. -
Page 40: Accessories/ Installation Procedure
8. Reconnect the - terminal of the battery. 9. Press the reset button. English • If your car is not prepared for this special connection- system, consult your Kenwood dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug..1 •... -
Page 41: Connecting Wires To Terminals
D "AUX IN" AUX right input (Red) Antenna Conversion Adaptor (ISO–JASO) (Accessory3) Antenna Cord (ISO) FM/AM antenna input Kenwood disc changer input To connect the Disc changer, consult your Disc changer manual. Battery wire (Yellow) Ignition wire (Red) See next page A–7 Pin (Red) -
Page 42: Connecting The Iso Connector
Connecting Wires to Terminals Connector Function Guide Pin Numbers for Cable Colour ISO Connectors External Power Connector Yellow Blue/White Orange/White Black Speaker Connector Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black English 2WARNING Functions Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive. -
Page 43: Installation
Installation Installation Metal mounting strap (commercially available) Firewall or metal support Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Screw (M4X8) (commercially available) • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). -
Page 44: Removing The Unit
Removing the Unit Removing the hard rubber frame Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. English Removing the Unit Refer to the section <Removing the hard rubber frame>... -
Page 45: Troubleshooting Guide
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General The power does not turn ON. ✔... - Page 46 Troubleshooting Guide Tuner source Radio reception is poor. ✔ The car antenna is not extended. ☞ Pull the antenna out all the way. ✔ The antenna control wire is not connected. ☞ Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. It isn’t the set Traffic information sound volume.
- Page 47 READING: The unit is reading the data on the disc. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center.
-
Page 48: Specifications
Middle : 1 kHz ±8 dB Treble : 10 kHz ±8 dB Preout level / Load (during disc play) KDC-W808: 5000 mV/10 kΩ KDC-W707: 2000 mV/10 kΩ Preout impedance (during disc play) : ≤ 80 Ω Auxiliary input (KDC-W808) Frequency response (±1 dB) : 20 Hz –...