Text Display Selection; Display Type B&E; Display Type C&D - Kenwood KDC-W7037 Instruction Manual

General features

Text Display Selection

—Display Type B&E—
Selecting the text display.
1
Enter Text Dispaly Selection mode
Using the Control knob, select "DISP" > "TEXT".
For the operation method, refer to <Function
Control mode> (page 10).
2
Select the text
Turn the Control knob or push it towards left
or right.
See <The text display> (page 13).
Display Type B: Information of condition column
"3" is displayed.
Display Type E: Information of condition column
"7" is displayed.
3
Exit Text Dispaly Selection mode
Press the Control knob.
⁄
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
• When the music number exceeds 1000, only the last
3 digits of its number are displayed. (KDC-W7537U/
W7537UY)
• Album name cannot be displayed in WMA file.
(KDC-W7037/W7037Y)
• Music title, Artist name, and Album name cannot be
displayed in WAV file. (KDC-W7537U/W7537UY)
• When playing music from iPod or music edited by "Music
Editor", the folder name display may show something
different such as playlist or artist name depending on
the music selection procedure. (KDC-W7537U/W7537UY)
• In the Display Type B part, alternate information is
displayed when display without information is selected.
• In the Display Type E part, no information is displayed
when display without information is selected.
|
12
English
Text Display Selection
— Display Type C&D—
Changing the text display.
1
Enter Text Display Selection mode
Using the Control knob, select "DISP" > "TEXT".
For the operation method, refer to <Function
Control mode> (page 10).
2
Select the text display part
Push the Control knob towards up or down.
The cursor (‰) moves to the selected text display
part.
Select the text
Turn the Control knob or push it towards left
or right.
See <The text display> (page 13).
Upper text display part: Information of condition
column "4" is displayed.
Middle text display part: Information of condition
column "5" is displayed.
Lower text display part: Information of condition
column "6" is displayed.
3
Exit Text Display Selection mode
Press the Control knob.
⁄
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
• When the music number exceeds 1000, only the last
3 digits of its number are displayed. (KDC-W7537U/
W7537UY)
• Album name cannot be displayed in WMA file.
(KDC-W7037/W7037Y)
• Music title, Artist name, and Album name cannot be
displayed in WAV file. (KDC-W7537U/W7537UY)
• When playing music from iPod or music edited by "Music
Editor", the folder name display may show something
different such as playlist or artist name depending on
the music selection procedure. (KDC-W7537U/W7537UY)
• Same information cannot be displayed in Upper text
display part, Middle text display part and Lower text
display part. However, the blank display is able to have
multiple selections.
• In the upper text display part, alternate information is
displayed when display without information is selected.