Specifications; Safety Recommendations - Winegard TRAV’LER SK-7003 Installation Manual

Before Installing the Antenna
You have selected the Winegard
the ability to view multiple satellites at the same time with unmatched signal strength, the lowest travel height on
the market, maximum HD capabilities and easy to use functionality—just like you get at home. This manual provides
important information on the installation and operation of your TRAV'LER antenna on an RV. Please take time to read
the manual in its entirety before installing or operating your antenna.
Follow the instructions on this side if installing the TRAV'LER Shaw Direct antenna. For operation instructions, follow
the instructions on the reverse side of the manual.

Specifications

Depending on location and receiver type, the following satellites can be accessed with the TRAV'LER Shaw Direct
antenna during automatic operation:
Height of assembled unit: 9.75"
Width of assembled unit: 37"
Length of assembled unit: 46"
23.5"
FIGURE 1. Dimensions of Antenna

Safety Recommendations

Do not attempt to install this system in the rain or under
any wet conditions. Moisture may affect electronics and
void your warranty.
Do not paint this antenna. Painting the TRAV'LER
antenna will void your warranty.
Pay attention to the pinch points as the antenna raises.
The pinch points should be labeled on the antenna (see
fig. 2).
1
TRAV'LER automatic multi-satellite TV antenna. The TRAV'LER antenna will deliver
®
®
107°, 111°.
Width of mount base: 21"
Length of mount base: 24"
46"
37"
FIGURE 2. Pinch points (labeled)
Unit Weight: 54 pounds (assembled)
Shipping Weight: 59 pounds (mount),
33.5 lbs (reflector, LNBF, & feed arm)