Parts Included; Specifications - Winegard Extreme 2.0 Installation And Operation Manual

Parts Included:

(1) Extreme 2.0 outdoor unit
(1) Power Over Ethernet power
inserter (POE) indoor only
(1) L-pipe
WARNINGS:
• Read this manual carefully and completely before attempting to assemble, install, or operate this product. Winegard
recommends that a professional technician installs this equipment.
• Save these instructions.
• POE MUST BE INSTALLED INDOORS.
• DO NOT MOUNT OVER CHIMNEY OPENING.
• Never install unit upside down. Improper installation will cause product damage.
• Do not paint any portion of the Winegard Extreme 2.0. This could damage the system and will void the warranty.
• When you initially set up the Winegard Extreme 2.0, we recommend you check for software updates the first time you
connect the system to an internet signal. We also recommend you check for updates every couple of months for fixes
and added features.

Specifications:

• Dimensions: 9.35" diameter, 8" tall
• Wireless standard: 802.11a/b/g/n/ac
• Frequency band: 2.4 GHz/5 GHz
• Amplifiers: 3x3 MIMO
• Antennas: (3) 2.4 GHz/5 GHz
(1) Wall mount
(1) Pipe mount
(1) Insert
(1) Hardware bag
• Wireless security:
WPA-PSK (TKIP)
WPA2-PSK (AES)
WPA-PSK (AES) & WPA2-PSK (AES)
WPA2-PSK (AES) & WPA3 (AES)
• Port: (1) RJ45 10/100/1000
• Power rating: Switching, AC input 100-240V, 1.5A
• POE: Not intended for outdoor installation
Items required:
Bolts/screws for wall mount
7/16" wrench
Phillips screwdriver
Ethernet cable(s)
2