Page 3
Simply pressing the [Power] button will not start a search. To start a search: Press and Hold [Power] for two seconds or until the TRAV’LER interface displays “POWER ON”. WINEGARD COMPANY POWER ON Now the power is ON and the button may be released. CONNECTING TO ANTENNA Once the power is on, the TRAV’LER interface will try to determine the type of dish that it is working with.
Page 4
To enter the Manual Search Mode while the TRAV’LER is stowed: Press the [Power] button and hold it for two seconds to turn the unit on. While the Trav’ler Interface reads: WINEGARD BURLINGTON POWER ON Press and hold the [Enter] button for two seconds.
Pressing [Select] then [Enter] or choosing NO will start a new search for your chosen satellite. EMERGENCY OFF: The Winegard TRAV’LER antenna comes with an emergency Power Off feature.To activate it, press and hold [POWER] and then press [SELECT] while still holding [POWER]. The TRAV’LER antenna will stop where it is and turn off.
Page 6
TRAV’LER is stowed. Press the [Power] button and hold it for two seconds to turn the unit on. While the TRAV’LER Interface reads: WINEGARD BURLINGTON POWER ON Press and hold the [Enter] button for two seconds. The TRAV’LER Interface will ask if you wish to enter the User Menu: ENTER USER MENU Press [Select] to choose YES and then press [Enter].
The Dish 1000’s 129 satellite is not available in all parts of the country and rain or snow will reduce the strength of the 129 satellite. Winegard recommends checking with DISH Network for coverage areas. Obstructions such as buildings or tree limbs can block the satellite signals and prevent the TRAV’LER from successfully locating all of the satellites for Multi-Sat Mode.
Need help?
Do you have a question about the SK-1000 and is the answer not in the manual?
Questions and answers