Simply pressing the [Power] button will not start a search. To start a search: Press and Hold [Power] for two seconds or until the TRAV’LER interface displays “POWER ON”. WINEGARD COMPANY POWER ON Now the power is ON, the button may be released. CONNECTING TO ANTENNA Once the power is on, the TRAV’LER Interface will try to determine the type of dish that it is working with.
To enter the Manual Search Mode while the TRAV’LER is stowed: Press the [Power] button and hold it for two seconds to turn the unit on. While the Trav’ler Interface reads: WINEGARD BURLINGTON POWER ON Press and hold the [Enter] button for two seconds.
Pressing [Select] then [Enter] or choosing NO will start a new search for your chosen satellite. EMERGENCY OFF: The Winegard TRAV’LER antenna comes with an emergency Power Off feature.To activate it, press and hold [POWER] and then press [SELECT] while still holding [POWER]. The TRAV’LER antenna will stop where it is and turn off.
HOME position. Look for obstructions if unit has recently been manually raised, or the electronics have been replaced. The calibration may need to be reset. Contact Winegard Technical Support 1-(800) 788-4417. Something is preventing the TRAV’LER mount from rotating; look for AZ MOTOR STALLED obstructions.
Need help?
Do you have a question about the TRAV’LER DIRECTV SLIMLINE SK-3005 and is the answer not in the manual?
Questions and answers