For New Zealand; For Singapore - Konica Minolta bizhub 42 Quick Manual

Mfp
Table of Contents

Advertisement

1
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information. If you home has specially wired alarm
equipment connected to the telephone line, ensure the installation of FK-509 does not disable you alarm
equipment. If you have questions about what will disable alarm equipment, consult your telephone company
or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including FAX machines, to send any message unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and
time it is sent and an identification of the business or other entity, or other individual sending the message
and the telephone number of the sending machine or such business, other entity, or individual. (The
telephone number provided may not be a 900 number or any other number for which charges exceed local
or long-distance transmission charges.)
In order to program this information into your FAX machine, you should complete the following steps: See
chapter 4.18.1, "Fax Settings-Sender Settings", of the [User's Guide Administrator Operations].
WARNING/CAUTION Explained
WARNING
The exclamation point within an equilateral triangle followed by the word "Warning" is intended to alert
the user to the possibility that a disregard for the warning may result in fatal hazards or critical injuries. Be
sure to focus your attention on the Warning headings when reading this Quick Guide.
CAUTION
The exclamation point within an equilateral triangle followed by the word "Caution" is intended to alert the
user to the possibility that a disregard for the caution may result in minor injuries or in physical damage.
Be sure to focus your attention on the Caution headings when reading this Quick Guide.

For New Zealand

1.
This device is equipped with pulse dialing while the Telecom standard is DTMF tone dialing. There is
no guarantee that Telecom lines will always continue to support pulse dialing.
2.
This equipment does not fully meet Telecom's impedance requirements. Performance limitations may
occur when used in conjunction with some parts of the network. Telecom will accept no responsibility
should difficulties arise in such circumstances.
3.
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted
that the item complies with minimum conditions for connection to its network. It indicates no
endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides
no assurance that any item will work correctly in all respects with another item of Telepermitted
equipment of a different make or model, nor does it imply that any product is compatible with all of
Telecom's network services.
4.
The automatic calling functions of this equipment must not be used to cause a nuisance to other
customers.
5.
Telepermitted equipment only may be connected to the auxiliary telephone port. The auxiliary port is
not specifically designed for 3-wire connected equipment. 3-wire might not respond to incoming
ringing when connected to this port.
6.
[Admin Settings] - [Fax Settings] - [Comm. Settings] - [Number of RX Call Rings] setting must be
configured between 2 and 10.

For Singapore

The TEL (telephone) port cannot be used in Singapore.
1-24
Special Notice to User
bizhub 42/36
1.7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 36

Table of Contents