Operation Precautions; Power Source; Operating Environment; Storage Of Copies - Konica Minolta bizhub 42 Quick Manual

1.9

Operation precautions

1.9 Operation precautions
To ensure the optimum performance of this machine, observe the precautions described below.

Power source

The power source requirements are as follows.
- Voltage fluctuation: Maximum ± 10% (at AC 110 to 120 V/AC 220 to 240 V), + 6/- 10% (at AC 127 V)
- Frequency fluctuation: Maximum ± 3 Hz (at 50 Hz/60 Hz)
– Use a power source with as little voltage or frequency fluctuations as possible.

Operating environment

The environmental requirements for correct operation of the machine are as follows.
- Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C) within an hour
- Humidity: 15% to 85% with fluctuations of no more than 10% within an hour

Storage of copies

To store copies, follow the recommendation listed below.
- Copies that are to be kept for a long time should be kept where they are not exposed to light in order
to prevent them from fading.
- Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
- Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color
copy is folded, the toner at the fold may peel off.

Data stored in this machine

For the machine with HDD, it is suggested to delete all data stored in all HDD areas using the overwrite all
data function to prevent leakage of data prior to transfer or disposal of the machine, or returning of the leased
machine.
For details of the overwrite all data function, refer to the [User's Guide Administrator Operations]. Contact
your service representative before deleting data.
bizhub 42/36
1
1-27