ENFORCER MVE-AT11-01NQ Manual

Extenders for hdmi over single cat5e/6

Table of Contents

Download this manual

MVE-AT11-01NQ

MVE-AT11-W1NQ

 Extend HDMI signals up to 230ft (70m) at 1080p over a single Cat5e/6 cable

 Plug and play operation – comes as a complete set

 Choose from either a tabletop model (MVE-AT11-01NQ) or a double-gang

wall-plate model (MVE-AT11-W1NQ)

 The tabletop and wall-plate models are compatible with each other. Mix

and match the transmitter from one model to the receiver of the other.

Note: Products with model numbers that end with "Q" or that have a round green "Q" sticker are RoHS compliant.

over Single Cat5e/6

Manual

Extender for HDMI over Cat5e/6

Wall-plate Extender for HDMI over Cat5e/6

Extenders for HDMI

MVE-AT11-W1NQ

Table of Contents

Need help?

Do you have a question about the Enforcer MVE-AT11-01NQ and is the answer not in the manual?

Page 1 Extenders for HDMI over Single Cat5e/6 Manual MVE-AT11-01NQ MVE-AT11-W1NQ MVE-AT11-01NQ Extender for HDMI over Cat5e/6 MVE-AT11-W1NQ Wall-plate Extender for HDMI over Cat5e/6  Extend HDMI signals up to 230ft (70m) at 1080p over a single Cat5e/6 cable  Plug and play operation – comes as a complete set ...
Page 2: Specifications
Single Cat5e/6 Introduction: The ENFORCER Enhanced Extenders for HDMI over Single Cat5e/6 extend the range of HDMI signals by using an active transmitter and receiver to send video and audio over a single Cat5e/6 cable. 1080p HDMI Signals can be transmitted up to 230ft (70m) between the two units with zero signal loss.
Page 3: Parts List
® ENFORCER Enhanced HDMI Extenders over Single Cat5e/6 Overview: MVE-AT11-01NQ MVE-AT11-W1NQ Front View Front View ” ” (114mm) ” HDMI Port Status LEDs IR Adapter HDMI In Extender for HDMI over Cat6e/6 ports Top View ” (116mm) 5VDC Power input ”...
Page 4 ® ENFORCER Enhanced Extenders for HDMI over Single Cat5e/6 Cable Legend: Sample Application: HDMI Power Standard installation of MVE-AT11-01NQ Cat5e/6 HDMI Source Receiver IR Tx Up to 230ft IR Rx (70m) Remote Display control Transmitter Installing MVE-AT11-01NQ transmitter with MVE-AT11-W1NQ receiver...

Mve-at11-w1nq