ENFORCER ENHANCED MVE-AH1H1-42YQ Installation Manual

4K ENHANCED HDMI Long Range
Extender
MVE-AH1H1-42YQ
Installation Manual
The ENFORCER 4K ENHANCED HDMI Long Range Extender extends the range of HDMI signals
by using an active transmitter and receiver to send video and audio, RS-232, and bi-directional IR
over a single Cat5e/6 cable. It can send 1080p signals up to 492ft (150m) between the two units
with zero signal loss, while 4K2K/UHD HDMI signals can be transmitted up to 394ft (120m). A
single power supply can power both devices from either end of the installation.
 Extends 1080p up to 492ft (150m) and 4K2K up to 394ft (120m)
 Supports resolutions from 480i to 4K2K/UHD
 Supports 18Gbps video bandwidth
 Plug and play operation – comes as a complete set
 HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
 Transmitter includes an HDMI loop output
 Analog stereo output on receiver
 Bi-directional IR, RS-232, and CEC pass-through
 Supports HDF, HDR10+, Dolby Vision, and HLG
 Includes one 24VDC power supply – set can be powered at either the transmitter or receiver
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries