ENFORCER MVE-AH1E1-01NQ Installation Manual

HDMI® Extender over Single Cat5e/6
MVE-AH1E1-01NQ
Installation Manual
The ENFORCER HDMI
methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6
cable. HDMI formats as large as 1080p can be transmitted up to 164ft (50m) between the two units
®
with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also
supports HDMI loop output, EDID management settings, and one-way IR control for remotely controlling
HDMI sources and displays
 Signal Strength – Active operation ensures that the signal strength will remain strong over the
length of the cable
 Distance – Capable of providing a clear HDMI signal up to 164ft (50m)
 Formats Supported – Supports both progressive and interlaced formats:
1080p/1080i/720p/576p/576i/480p/480i
 Plug and Play – Comes as a complete set consisting of a transmitter and receiver, power supplies,
and IR dongles
 Zero Signal Loss – Integrated circuits in the transmitter and receiver clean, buffer and amplify the
HDMI signal to prevent signal loss and ensure a clear signal regardless of the length of the cable
 IR Pass-Through – Send IR signals from the monitor to the source for discrete operation of devices
 EDID Management – Use Extended Display Identification Data (EDID) management settings to
match the display settings to the source device
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc..
Extender over Single Cat5e/6 extends the range of traditional HDMI
®
.
cabling
®