ENFORCER MVE-AH010Q Manual

Hdmi extender over cat5e/6

Table of Contents

Download this manual

MVE-AH010Q

HDMI Extender Over Cat5e/6

Manual

FULL

1080p

Resolution

Up to 196' (60m)

Extend HDMI over two (2) inexpensive Cat5e/6 cables.

Supports resolution from 480i to 1080p with zero signal loss.

Transmits up to 196' (60m) at 1080p over two (2) Cat6 cables.

Plug and play operation—comes as a complete set.

NOTE: Model numbers that end with ―Q‖ or products that have a round green ―Q‖ sticker signify RoHS compliance.

Table of Contents

Need help?

Do you have a question about the MVE-AH010Q and is the answer not in the manual?

Page 1 MVE-AH010Q HDMI Extender Over Cat5e/6 Manual FULL 1080p Resolution Up to 196’ (60m) Extend HDMI over two (2) inexpensive Cat5e/6 cables. Supports resolution from 480i to 1080p with zero signal loss. Transmits up to 196’ (60m) at 1080p over two (2) Cat6 cables.
Page 2: Specifications
ENFORCER ® HDMI Extender Over Cat5e/6 Introduction: The HDMI over Cat5e/6 extends the range of traditional HDMI cabling methods up to 196’ (60m). The HDMI over Cat5e/6 uses an active transmitter to send video and audio over Cat5e/6 cables in HDMI formats as large as 1080p. The HDMI signal that is transmitted between the two units has zero-signal loss by using integrated circuits located in the receiver and transmitter.
Page 3 ENFORCER ® HDMI Extender Over Cat5e/6 Overview: MVE-AH010Q (receiver shown) 5VDC Power Input HDMI Output CAT5e-1 CAT5e-2 HDMI Output 2 RJ-45 Inputs ENFORCER HDMI over CAT5 Extender Receiver Two (2) Cat5e/6 cables are required. Please use T568B wiring standard. Installation: 1.
Page 4: Troubleshooting
ENFORCER ® HDMI Extender Over Cat5e/6 Troubleshooting HDMI device does not function correctly Make sure the Cat5e/6 cables are connected to the correct ports, and not to opposite ports Make sure the HDMI input device is turned on. Make sure the HDMI output device is turned on.