ENFORCER MVE-AH1E1-42NQ Installation Manual

4K HDMI® Extender over Single Cat5e/6
MVE-AH1E1-42NQ
Installation Manual
The ENFORCER 4K HDMI
cabling methods by using an active transmitter and receiver to send video and audio over a single
Cat5e/6. HDMI formats as large as 4K can be transmitted up to 197ft (60m) between the two units
with zero signal loss by using integrated circuits in the receiver and transmitter.
 Signal Strength – Active operation ensures that the signal strength will remain strong over the
length of the cable.
 Distance – The 4K HDMI
197ft (60m) at 4K resolution or 230ft (70m) at 1080p resolution.
 Formats Supported – The 4K HDMI
and interlaced formats: 4K@60Hz/4K@30Hz/1080p/1080i/720p/576p/480p/480i.
 Plug and Play – The 4K HDMI
consisting of a transmitter and receiver, power supply, and IR dongles.
 Zero Signal Loss – Integrated circuits in the transmitter and receiver clean, buffer, and amplify
the HDMI signal to prevent signal loss and ensure a clear signal regardless of the length of the
cable.
 IR – Send IR signals from the monitor to the source for discrete operation of devices.
 Loop out – Supports a local monitor.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Extender over Single Cat5e/6 extends the range of traditional HDMI
®
Extender over Single Cat5e/6 can provide a clear HDMI signal up to
®
Extender over Single Cat5e/6 supports both progressive
®
Extender over Single Cat5e/6 comes as a complete set
®
®