Master Om-3000 Network Troubleshooting - Datalogic Dragon D131 Reference Manual

Hide thumbs Also See for Dragon D131:
Table of Contents

Advertisement

3.2.3

Master OM-3000 Network Troubleshooting

Two diagnostic strings can be sent via RS232 from the Host to the Master cradle in
order to have feedback about the network itself.
#+LSlave
Returns a list of all the Slaves recognized at boot up.
Example:
In a network where the Master cradle has address 0188 and one Slave cradle with
address 0001, the response is:
188
1
#+Alive<xxxx>
Executes a continuous Alive request to the slave xxxx in order to monitor the
performance of the connection. A diagnostic message is displayed on the Host.
Example:
If this command is sent for slave cradle with address 0032, the response is:
/*32: OM-30X0 SOFTWARE RELEASE 1.00 20/10/2006*/
if there are no communication errors
/*32: FAIL*/
if there are communication errors.
To exit from this command, reset the system by cycling power to the Master cradle.
DRAGON™ M131 SYSTEM AND NETWORK LAYOUTS
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dragon m131

Table of Contents