Fixed Desktop Use - Datalogic Dragon D131 Reference Manual

DRAGON™ DX31/MX31
Portable Desktop Use
1.
Correctly position the OM-30X0/C-3000 onto the base by sliding it along the
mounting tabs until aligned.
1
2.
Carefully clean the rubber foot seats of the base to remove any impurities that
could reduce adhesion.
3.
Remove the protective plastic from the rubber feet and stick them onto the
bottom surface of the base.
4.
If mounting the OM-30X0 cradle, insert the antenna in the appropriate hole on
the body of the cradle and screw it clockwise until tight.

Fixed Desktop Use

For fixed desktop installation, use the adhesive strips or fixing screws (not provided)
according to your needs.
For mounting with adhesive strips:
1.
Position the cradle onto the base by sliding it along the mounting tabs until
aligned.
2.
Carefully clean the adhesive strip seats of the base to remove any impurities that
could reduce adhesion.
3.
Remove the protective plastic from one side of the adhesive strips and stick
them onto the base surface.
14
2
1
2