Table of Contents
Advertisement
4.
Position the cables to be connected to the OM-30X0/C-3000 cradle along the
dedicated channels, as shown in the figures below:
Horizontal Base
5.
Remove the plastic from the other side of the strips and affix the base to the
table.
6.
If mounting the OM-30X0 cradle, insert the antenna in the appropriate hole on
the body of the cradle and screw it clockwise until tight.
For mounting with screws:
1.
Position the cables to be connected to the OM-30X0/C-3000 cradle along the
dedicated channels, as shown in the figures below:
2.
Position the base on the table and affix it by means of the screws (not provided).
3.
Position the cradle on the base by sliding it along the mounting tabs until
aligned.
4.
If mounting the OM-30X0 cradle, insert the antenna in the appropriate hole on
the body of the cradle and screw it clockwise until tight.
INSTALLATION
Inclined Base
15
Hide quick links:
Advertisement
Table of Contents
