Sectors; Miscellaneous - Bosch AUTODOME IP starlight 5100i User Manual

44 en | Camera
2.
3.
4.
5.
To define a Custom tour
1.
2.
3.
4.
5.
6.
Sequence settings
Include in standard tour (marked with *)
Select this checkbox to include the pre-position in the standard tour.
Upload
Click the button to upload the tour configuration to the camera.
Dwell times
Standard pre-position tour
Select the dwell time in seconds or minutes for the Standard pre-position tour.
Custom pre-position tour
Select the dwell time in seconds or minutes for the Custom pre-position tour.
7.11

Sectors

To define a title for sectors:
1.
2.
3.
7.12

Miscellaneous

Fast address
This parameter allows the appropriate camera to be operated via the numerical address in the
control system. Enter a number between 0000 and 9999, inclusive, to identify the camera.
2020-11 | draft 0.9 |
To remove a pre-position from the tour, select the pre-position in the list and uncheck the
box Include in standard tour (marked with *).
Select a dwell time from the drop-down list Standard pre-position tour.
To start the Pre-position Tour:
Return to the Live page.
Click AUX Control.
Type 8 in the input box and click AUX on.
To stop the tour, type 8 and click AUX off.
Create the individual pre-positions.
To add a pre-position into the custom tour, select the pre-position from the general list
and click the triangle button to copy it to the custom tour list.
Adjust the custom tour sequence by moving preposition up or down.
Select a dwell time from the drop-down list Custom tour .
To start the Custom tour:
Return to the Live page.
Select Special Functions.
Click AUX Control.
Type 7 in the input box and click AUX on.
To stop the tour, type 7 and click AUX off.
Place the cursor in the input box to the right of the sector number.
Type a title for the sector, up to 20 characters long.
To blank the sector, click the check box to the right of the sector title.
User Manual
AUTODOME IP starlight 5100i
Bosch Security Systems