Nothing Happens After The Computer Sends Data; When Printer Sends Data, The Printer Shows And Error And Does Not Print; Parts Of The Print Are Dirty Or Missing; Rj-6000 Series User Guide Basic Edition - MUTOH RJ-6000 Series User Manual

When Trouble Strikes

#Nothing happens after the computer sends data

Possible Cause
(1) Is the interface cable con-
nected?
(2) Are ink cartridges
installed?
(3) Do they contain ink?
(4) Have you replaced the
waste box?
#When printer sends data, the printer shows and error and
does not print
Possible Cause
(1) Does the computer have
the proper type of equip-
ment selected?
(2) Do interface conditions
and command modes
match on both computer
and printer?

#Parts of the print are dirty or missing

NOTE
• If the media is not media specified by Mutoh, you may be
unable to obtain proper printing quality.
Possible Cause
(1) Is the media damp?
(2) Are you using creased or
wrinkled media?
92
Refer to "Connecting the inter-
face cable".
Install ink cartridges.
Replace ink cartridges.
Replace waste box.
Check that the equipment type
settings are the same on both
the computer and printer.
(Refer to "To receive data from
the computer".
Replace with new media.

RJ-6000 Series USER GUIDE Basic Edition

Remedy
Remedy
Remedy
Reference
Page
Page 48
Page 34
Page 79
Page 84
Reference
Page
Page 49
Reference
Page
Page 37