Specify The Type Of Media - MUTOH RJ-6000 Series User Manual

Specify the Type of Media

Here we select whether the media to be loaded in the RJ-6000 Series printer
will be standard media or thin media.
NOTE
• If you are unable to judge whether the media to be used is
standard media or thin media, you should do the "Media Feed"
as shown on page 67 before printing. At that time, check
whether the media is catching or wrinkling.
With the hold lever up, press the [MEDIA WEIGHT] key. If the media to be
loaded is standard media, light up standard media. If the media to be loaded
is thin media, light up thin media.
For thin media
CAUTION
• Be careful. A paper jam will be caused and the head may be
damaged if thin media is loaded in the printer and thin media is
not selected at the panel.
• If you are using media other than media specified by Mutoh in
the "List of Optional and Supply Items" on page 106, if thin
media is loaded, thin media must be specified at the panel.
36
For standard media
RJ-6000 Series USER GUIDE Basic Edition
: L i t
: N o t l i t