Preparation; Opening The Server - Fujitsu PRIMERGY RX600 S4 Options Manual

4

Preparation

V
CAUTION!
Make sure you observe the safety notes in the
tions" on page
Ê Exit all applications and shut down the server properly.
Ê If your operating system has not switched off the server, press the On/Off
button.
Ê Unplug the power plugs from the grounded power outlets.
4.1

Opening the server

Figure 2: Removing the server
Ê Undo the knurled screws (1) and pull the server carefully out of the rack (2)
as far as possible.
Ê In the majority of cases it makes sense to remove the server from the rack.
I
How to remove the server from the rack cabinet is described in the
operating manual.
RX600 S4
11ff.
Options Guide
chapter "Safety instruc-
17