Main Memory - Fujitsu PRIMERGY RX600 S4 Options Manual

5

Main memory

V
CAUTION!
Make sure you observe the safety notes in the
tions" on page
The system board provides slots for four memory boards, each of which can
accommodate up to eight memory modules.
The slots are suitable for DDR-II / 533 or 667 MHz FBDIMM modules with up to
8 Gbytes capacity per memory module, allowing a maximum memory configu-
ration of 256 Gbytes.
I
Due to the many and varied memory configuration options in the
RX600 S4, work on the memory boards should only be performed
by qualified engineers. The required procedure is therefore described
in the service supplement for this server.
RX600 S4
11ff.
Options Guide
chapter "Safety instruc-
19