Fujitsu PRIMERGY RX600 S4 Options Manual page 25

Processors
Installing the heat sink
V
CAUTION!
Never install a processor without a heat sink, as the processor may
overheat, causing itself and the complete system board to fail.
Ê Carefully place the heat sink onto the processor.
I
Make sure you do not touch or damage the thermal paste on the
underside of the heat sink.
Figure 8: Fastening the heat sink
Ê Fasten the heat sink with four screws. First fasten two diagonally opposite
screws, then the other two.
RX600 S4
Installing additional processors
Options Guide 25