Fujitsu PRIMERGY RX600 S4 Options Manual page 24

Installing additional processors
Installing the processor
Figure 6: Opening the socket lever
Ê Release the socket lever by pressing it sideways ; then lift it up as far as it
will go.
Figure 7: Inserting the processor
V
CAUTION!
The processor can only be installed in one direction. Note the marking
on one of the corners (see diagram above). To avoid damaging the pins,
do not force the processor into the socket.
Ê Position the new processor above the socket, and press it carefully into the
socket (1).
Ê Lock the processor into place in the socket by pushing the socket lever back
into its original position (2).
24 Options Guide
Processors
RX600 S4