Fujitsu PRIMERGY RX600 S4 Options Manual page 29

Processors
I
Make sure the thermal paste on the underside of the heat sink is not
damaged.
Ê Fasten the heat sink with four screws (see
nally opposite screws, then the other two.
Ê Reinstall the processor cover (see
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
RX600 S4
chapter "Completion" on page
Options Guide
Replacing a processor
page 25). First fasten two diago-
page 26).
47f.
29