Burning A Disc Image - JVC CU-VD40U Instructions Manual

CyberLink Power2Go

Burning a Disc Image

A disc image is a duplicate of the content and file structure that is
destined to be burned to disc. Using Power2Go, you can burn a disc
image to CD or DVD. Burning a disc image to disc allows you to
restore a saved disc image to disc as well as burn disc images created
by the CyberLink Image Recorder.
To burn a disc image, do this:
1. Start CyberLink Power2Go.
2. In the Select a Burning Task window, click Disc Utilities, then
select Burn Disc Image.
3. Click Browse... and locate the disc image.
4. Insert your disc and select your drive in the drop-down list.
You can select a different write speed or enter the number of
•
copies you want to burn, if desired. If you want to perform a
write simulation before you burn the disc, check Perform
write simulation.
5. Click Burn to start. Power2Go displays the real-time progress of
the task. When the task is completed, a screen message appears,
informing you of the status.
6. When burning is complete, select an option in the dialog box
that opens:
Click View Log to view the burning log. The log opens in
•
your default TXT editor, where you can view and save it.
46