JVC CU-VD40U Instructions Manual page 50

CyberLink Power2Go
Video Tab (for VCD)
The Video tab displays options for making a VCD or video DVD.The
options described below pertain to VCDs only.
TV format: Set the TV format (NTSC or PAL) of the video
•
you are burning to disc.
Back up photos on disc: Make backup copies of your original
•
photos whose resolution is higher than that of your final
movie production.
First Playable Action: Set the first action the VCD Player will
•
take when you insert this disc into the VCD Player.
Video Tab (for DVD)
The Video tab displays options for making a VCD or video DVD.The
options described below pertain to DVDs only.
TV format: Set the TV format (NTSC or PAL) of the video
•
you are burning to disc.
Save to Hard Drive: Check an option to burn both a disc
•
image and a DVD folder, or only a DVD folder, to your hard
drive. If you check the Create DVD folder on hard drive
option, click Browse... to locate the folder you want to use.
Back up photos on disc: Make backup copies of your original
•
photos whose resolution is higher than that of your final
movie production.
Enable DVD Auto-fit: Check this option to automatically fit
•
the video onto one disc with the best quality.
Audio Format: Select LPCM (an uncompressed audio
•
format) or Dolby Digital (uses the Dolby Digital Consumer
Encoder format).
Note: In your version of Power2Go, this feature may be limited. To
obtain the full functioning of this feature, please purchase or
install the retail version of Power2Go. (To check your version of
Power2Go, click the About button.) Version information is
provided in the Readme file.
First Playable Action: Set the first action the DVD Player will
•
take when you insert this disc into the DVD Player.
18