JVC CU-VD40U Instructions Manual page 52

CyberLink Power2Go
Enable buffer underrun protection: Enabling this option
•
ensures that data is written to disc without interruption. (An
interruption in data can result in an unusable disc.)
Write simulation before burning: Perform a write
•
simulation to verify that your burner can burn to the disc at
the selected speed without error.
Note: If you have enabled buffer underrun protection or have
previously burned discs using the current configuration, you do
not need to run a simulation.
Close disc: Checking this option write-protects the disc. No
•
further data can be appended to the disc after the current
burning session.
Verify recorded data: Check this option to compare recorded
•
data to the source data to ensure accurate burning.
20