Viewing High Quality Images - JVC CU-VD40U Instructions Manual

Viewing High Quality Images
II
2.
CONFIRM
• If the image is not displayed on the TV after changing
the resolution, do not operate the burner for 15
seconds. The resolution setting before the change is
restored.
NOTES:
• When HDMI cable is connected, images are not output in
analog.
• When I/480i" is selected, images are output from both the
VIDEO connector and the COMPONENT VIDEO OUT
con nectors.
• Select "YES".
Connection via HOMI
cabh~
(However, the selections
for resolution not supported by TV may not be
displayed.)
C
AUTO
- - - - +
480p
- - - - - +
1080i
- - - - +
720p
J
Connection via component video cable (HOMI cable
is not connected)
C
480i
- - - - +
480p
- - - - - +
1080i
- - - - +
720p
J
• Every press of the button changes the resol ution as
follows.
You can change the video output resolution when the burner is connected to a progressive scan TV
via an HOMI cable or component video cable.
o
Change output restJ/ution during
stop mode.
Connection via video
cabl.~
Set the resolution to "480i". Image cannot be
displayed if other settings are being selected. Press
the [RESOLUTION] button and set to "480i".
CAUTION:
• 1/ AUTO" wi II be selected automatically when the burner is
connected via an HDMI cable to a TV not supporting the
selected resolution.
• When the burner is connected to a TV via a component
video cable and the output resolution is set to 1/1 OaOi" or
I/720p", playback will stop if a digital copy protected (CSS)
disc is played. (ITP24)
19