JVC CU-VD40U Instructions Manual page 48

CyberLink Power2Go
computer from your CD, DVD, Blu-ray, or HD DVD disc
drive if your operating system ever fails. Burning a bootable
CD, DVD, Blu-ray, or HD DVD disc requires a bootable file
(either on your hard drive or on a bootable floppy disc).
Check Use a bootable image file, then click Browse... to
locate the file you want to use, or check Use a bootable
floppy disc.
Make auto-run disc: When this option is enabled, a computer
•
runs the selected auto-run file when the disc is inserted. Click
Browse..., then locate the auto-run file you want to use. When
this option is disabled, the computer takes no action when
the disc is inserted.
Change disc icon: You can change the icon that appears
•
when this disc is viewed in Windows Explorer. Click
Browse..., then locate the icon (.ICO) file you want to use.
File system: Set the File system (ISO9660/Joliet, UDF 1.5,
•
UDF 2.0, or UDF 2.5) of the disc you are burning.
Auto-split content by capacity: automatically divides the
•
files to be burned into volumes (portions) according to the
size of the destination disc.
Audio CD Tab
The Audio CD tab displays options for making an Audio CD music
disc, or CD Extra or Mixed Mode CD.
Enable CD text: allows you to add textual information
•
(album or artist name) to audio tracks. Enter the desired
information in the entry boxes provided.
Normalize volume of all tracks on the CD: adjusts the
•
volume of all of the audio tracks on the CD to the same level.
Auto-split content by capacity: automatically divides the
•
files to be burned into volumes (portions) according to the
size of the destination disc.
Insert audio gap between tracks: allows you to add silence
•
between tracks. Enter the desired duration in the Seconds
box.
MP3 Quality Tab
The MP3 Quality tab displays options for making an MP3 music disc.
Quality: Select a quality from the drop-down box.
•
16