Copying Discs - JVC CU-VD40U Instructions Manual

Copying Discs

The Copy Disc option allows you to make an exact copy of a disc of
any format. However, you must copy the disc contents onto a blank
disc of the same disc type. (You cannot, for example, copy content
from a CD onto a DVD.)
Note: Some discs may not be copied if they are copy-protected
or contain errors.
The procedures for copying a disc from inside the Power2Go
program or in Power2Go Express mode are very similar. Only the
first step for opening the Copy Disc window is slightly different.
To copy a disc, do this:
1. Open Power2Go.
2. Open the Copy Disc window.
Power2Go mode: In the Select a Burning Task window, click
•
the Copy Disc icon , then click OK.
Express mode: Double-click the Copy Disc icon.
•
3. Select your source and target drives.
4. Select a read and a write speed and enter the number of disc
copies you want to burn.
If you wish to copy the disc even if errors are encountered,
•
check Ignore reading error.
If you want to perform a write simulation before you burn
•
the disc, check Perform write simulation.
5. Click Copy. Power2Go burns the copied data onto the disc.
6. When burning is complete, select an option in the dialog box
that opens:
Click View Log to view the burning log. The log opens in
•
your default TXT editor, where you can view and save it.
Chapter 2: Burning
43