Enjoy High Definition Images Copied to DVDs! Copying to DVD Connect. Audio/Video cable (provided) (provided) Select the desired copy method. The following 6 methods of copying are available. GZ-HD7 Methods of copying Types of copy operation instruction manual 0Page 48 Copy all images shot.
Viewing Images Copied to DVD on the TV Connect. Audio/Video cable (provided) A Disconnect the USB cable and turn off this burner. B Connect the burner to the TV. To view high definition images, connect using an optional HDMI cable or component video cable. Play back.
This burner enables DVDs of videos recorded with the Caution on Replaceable lithium battery JVC Hard Disk Camera to be created without using a PC. The battery used in this device may present a fire or chemical burn ● If you want to edit videos recorded with the camera and create hazard if mistreated.
• Do not use for any product other than this one. ● Do not play the provided CD-ROM with an audio player. Doing JVC accepts no liability whatsoever for loss of data resulting from inappropriate connections or handling. so may damage the circuits or speakers.
Contents DVD Burner Enjoy High Definition Images Copied to DVDs! ......2 CU-VD40 Copying to DVD .................... 2 Viewing Images Copied to DVD on the TV........... 3 ENGLISH Safety Precautions ..............4 Contents..................6 Getting Started ................7 Accessories ....................7 Placing the Burner ..................7 Inserting a Disc.....................
Getting Started Accessories Power cord USB cable Audio/Video AC adapter Stand cable (AP-V400U Remote control DVD-ROM Recording disc (DVD-R DL) Lithium Battery (CR2025) (RM-V41U) (For use with high definition Everio Camera. Pre-installed in the remote Cannot be used with an Everio Camera.) control unit.
Guide to Parts and Controls Front .................................. A Open/Close Button (M) B Power Button (C/B) C Power Lamp Green light: When connected to Everio camera or Orange light: During playback. D Play/Pause Button (I/W) A B C D E F G E Stop Button (o) F Previous Button (S) G Next Button (T)
Connecting to TV To view high definition images, connect using an optional HDMI cable or component video cable. Connecting to a TV with HDMI Input Terminal This burner COMPONENT VIDEO OUT VIDEO HDMI AUDIO HDMI cable (not provided) NOTES: Images can only be displayed on a High-bandwidth Digital Content Protection (HDCP) monitor. (0P24) When images do not appear normally, set the “HDMI COLOR SETTING”...
Connecting to a TV with Video/Audio Input Connectors Connect the output connectors of the burner to the input connectors of the TV with the provided Audio/Video cable. This burner COMPONENT VIDEO OUT AUDIO IN VIDEO AUDIO VIDEO IN Audio/Video cable R=Red L=White Audio/Video cable (provided)
Saving Everio Camera Images to DVD You can easily create data discs by connecting the burner to an Everio camera. Press the [OPEN/CLOSE] button To Connect after the menu appears on the Everio. PREPARATIONS: Power/Mode switch (Everio camera) : Off The disc tray opens.
Saving PC Images to DVD This burner can be used as a DVD burner by connecting it to a PC. Images edited on a PC can also be saved to a DVD by using the provided software. For details on how to save, refer to the Power2Go To Connect User’s guide, Help and ReadMe.
Enter the “User Name” and Installing CyberLink Power2Go 5.5 “Company Name” and then click Lite “Next”. CAUTION: Do not play the provided CD-ROM in an audio player. It is not an audio CD. Playing this CD-ROM in an audio player will result in a loud high noise.
Folder Configuration This shows the folder configuration when files are saved from a high definition Everio camera or a PC to DVD. When video/still image files are saved from high definition Everio camera .................................. Back-up date folders Video folders Root [EVERIO_V] [BACKUP] ...
Viewing Images Saved in DVD This burner can play DVDs saved from an Everio camera or a PC. Viewing Videos Saved from High Definition Everio Camera Select “NORMAL BACK-UP”. To playback the image immediately after saving in 1. SELECT PLAY VIDEO 1.
Buttons that can be used during playback .................................. Button names During video playback During still image playback Pressing the button during pause or variable Starts a slideshow. PLAY speed playback will play the video. You can also use the [ENTER] button. You can also use the [ENTER] button.
Viewing Still Images Saved from High Definition Everio Camera Select the date saved in DVD. To playback the image immediately after saving in 1. SELECT PLAY IMAGE 1. Remove the USB cable. (0P12) NORMAL BACK-UP NAME 06060101 06060101 2. Turn off the power of this burner. 3.
Viewing DVD Videos Saved from Everio Camera CAUTION: To playback the image immediately after saving in Check the resolution setting if the image is not displayed. (0P19) 1. Remove the USB cable. (0P12) 2. Turn off the power of this burner. NOTE: 3.
Viewing High Quality Images You can change the video output resolution when the burner is connected to a progressive scan TV via an HDMI cable or component video cable. Change output resolution during Select “YES”. stop mode. 1. SELECT CURRENT RESOLUTION : 576i DO YOU WANT TO SAVE THE SETTINGS? 2.
Changing the Settings Configures basic settings that determines the operation of the burner. Menu Operation Procedures Select “YES”. <Example> To change the “SELECT TV TYPE” of “VIDEOS” from “16:9” to “4:3LB”. 1. SELECT SETTINGS VIDEOS SELECT TV TYPE 4:3 LB When connected to TV and power is on HDMI COLOR SETTING AUTO...
Setting Items And Contents is the default setting. VIDEOS SELECT TV TYPE Configure the settings according to the TV to be connected. (If the screen size setting of the TV is fixed, the screen size setting of the TV remains the same even if you change the setting on this burner.) 16:9 When connected to a wide TV (16:9).
Screen Display Information during playback can be displayed on the screen. When playing video saved from a high During playback definition Everio camera ................File Date (Displays the date and time of recording of the first file in the folder.) Every press of the button changes the display mode.
Troubleshooting Trouble Cause/Action General Make sure the AC adapter and power cord are connected properly. Cannot turn the power on. This is not a malfunction. The burner or AC adapter is hot. If the burner is abnormally hot, remove the AC adapter and consult the dealer from which you purchased the burner.
Trouble Cause/Action Is the video input displayed? Change to external output for the burner connected to a TV with video/audio input connectors. When the image is not displayed on the TV after pressing the No images on the TV. [RESOLUTION] button, do not operate the burner for 15 seconds. The resolution setting before the change is restored.
Recommended discs Rated current ................1.7 A DVD-R Dimensions (W c H c D) JVC, TDK, Verbatim, SONY 171 c 56 c 262 mm DVD-R DL Weight of main unit JVC, Verbatim Approx. 1.4 kg (excluding AC adapter and connection cables)
Component video output Reading DVD-R : Maximum 12x Y p-p : 1.0 V 75 & (Pin jack) DVD-RW : Maximum 12x p-p : 0.7 V 75 & (Pin jack) DVD-ROM : Maximum 5x HDMI output DVD-R DL : Maximum 8x 19-pin HDCP compliant CD-R : Maximum 10x Video : 576p / 1080i / 720p...
在电视机上查看复制到 DVD 的影像 连接。 音频 / 视频缆线 （随带） A 拔下 USB 缆线并关闭本刻录机。 B 将刻录机连接到电视机。 要查看高清晰影像，请使用可选HDMI 缆线或视频分量缆线进行连接。 回放。 A 打开刻录机。 确认电源灯亮起橙色。如果电源灯未亮起橙色，请拔下 USB 缆线，然后关闭并再次打开电源。 约 20 秒后 B 按打开 /关闭 （M）按钮弹出托盘。 C 放入已封盘的光盘。 D 按打开 /关闭 （M）按钮收回托盘。 出现以下画面。 E 回放。 有关回放的详细信息，请参阅本说明书第 15 页。 从...