Ducati Superbike 1199 panigale S Owner's Manual page 45

Selecting the Riding Mode
Press CONFIRM MENU button (4) to enter the menu
for selecting the Riding Mode (A, fig. 17).
The instrument panel displays the speed indication
(on the right) and riding mode name (on the left):
- RACE
- SPORT
- WET
one of these will be highlighted to indicate that it was
the last stored setting and is currently in use.
Warning
It is not possible to open the menu for selecting
the riding mode, if button (4) is in the position for
activating the turn indicators (to the left or right).
For the highlighted Riding Mode some of the
parameter settings are displayed:
- DTC: the DTC text followed by the level of
intervention set (1, 2, 3, 4, 5, 6, 7, 8) in case the
DTC is active or by OFF in case the DTC is
disabled;
- EBC: the EBC text followed by the level of
intervention set (1, 2, 3) in case the EBC is active
or by OFF in case the EBC is disabled;
- engine power (ENGINE): the ENG text followed by
the set engine power. Power options are
displayed as 195 Hi, 195 Lo or 120, while in some
44
countries (such as France and Japan) these
options are displayed as HIGH, MID or LOW2;
- DQS: the DQS text followed by ON in case the
DQS is active or by OFF in case the DQS is
disabled;
- ABS: the ABS text followed by the level of
calibration set (1, 2, 3) in case the ABS is active or
by OFF in case the ABS is disabled.
The displayed information is the settings stored in
every single Riding Mode. The stored settings may
be the factory ones (Ducati default settings) or the
ones customised by the owner.
Any time the CONFIRM MENU button (4) is pressed,
you highlight a riding mode and the associated
parameters are displayed (A, fig. 17).
Once the desired riding mode is highlighted, confirm
the selection by holding down the CONFIRM MENU
button (4) for 2 seconds: the new riding mode
selection is stored and the Standard Screen is
displayed (B, fig. 17).
Once the desired riding mode is highlighted, if the
CONFIRM MENU button (4) is not pressed within 10
seconds, the new riding mode selection is not stored
and the Standard Screen is displayed (C, fig. 17).