Table of Contents
Advertisement
The functions within the Setting MENU that can be
modified by the user are the following:
- RIDING MODE customisation: within this menu,
rider can customise the following:
- ABS setting (ABS)
- Electronic suspension setting (DES)
- Display settings (DISPLAY)
- DQS ON/OFF (DQS)
- DTC level (DTC)
- Engine setting (ENGINE)
- EBC level (EBC)
- Reset to default factory settings (DEFAULT)
- Engine rpm digital indication (RPM)
- Battery voltage (BATTERY)
- DDA (on/off - view - delete)
- PIN CODE (enter/change)
- Clock settings (CLOCK SETTING)
- Date settings (DATE)
- Display backlighting (BACK LIGHT)
- Units of measurement (Speed - Temperature -
Fuel consumption) UNIT
- LAP (view/delete/reset automatic settings)
The area for the range from 10500 to 11500 rpm (pre-
warning area) is indicated on the display in orange
both with the bargraph filling and with the indication
of the corresponding figure 11 ("orange area").
The area for the range from 11500 to 12000 rpm
(warning area) is indicated on the display in red both
with the bargraph filling and with the indication of the
corresponding figure 12 ("red area").
Important
During the first 1000 km (Running-in), i.e. as
long as the Odometer displays a value lower than or
equal to 1000 km, the "orange area" (pre-warning
area - indicated on the display in orange both with the
bargraph filling and with the indication of the
corresponding figure) is displayed when engine
reaches 6000 rpm. During this running-in period, it is
recommended not to exceed 6000 rpm so make sure
the instrument panel does not display the "orange
area" of the bargraph.
37
Advertisement
Table of Contents
