Advanced Setup - Aaeon SBC-400 User Manual

The password check option is enabled in Advanced Setup by
choosing either Always or Setup. Here, you determine the password
to be used. The password is stored in CMOS RAM.
To assign a password,
1. Enter a 1-6 character password. The password does not appear
on the screen when typed.
2. Retype the password when prompted by WinBIOS.
A message box will appear when the password is confirmed.
Keep a record of the password. If you forget the password, you
must drain CMOS RAM and reconfigure the system.
1. Select the Password icon from the Security section of the
WinBIOS Setup main menu.
2. Enter the password and press <ENTER>. The screen does not
display the characters entered.
3. After the new password is entered, retype the new password as
prompted and press <ENTER>.
If the password confirmation is incorrect, an error message
appears. If the new password is entered without error, press <ESC>
to return to the WinBIOS setup Main Menu. The password is
stored in CMOS RAM after WinBIOS Setup completes. The next
time the system boots, you are prompted for the password if the
password function is present and is enabled.
50 SBC-400 User's Manual