Aaeon SBC-400 User Manual page 45

The WinBIOS Setup options described in this section are selected
by choosing the Standard icon from the WinBIOS Setup main
menu selection screen, as shown below.
The Standard Setup screen appears:
Select the Date and Time icon in the Standard setup. The current
values for each category are displayed. Enter new values through
the keyboard.
Select these icons to configure the type of floppy drive that is
attached to the system: 360 KB 5¼", 1.2 MB 5¼", 720 KB 3½",
1.44 MB 3½", and/or 2.88 MB 3½". The settings have not been
pre-installed.
Select these icons to configure the hard disk type you are using for
the master and the slave. The settings have not been pre-installed.
Type in 1~46, User, ESDI, or SCSI.
38 SBC-400 User's Manual