Insert New Waypoint - Leica apMK12 Operation & Installation Manual

Route

Insert New Waypoint

Version 1.5
35
this WPT softkey.
7. When you are finished, press the Done softkey to get back to the
main menu.
8. You can then choose to select another waypoint using the same
method, select Escape to go back one level and use another method
to enter waypoints, or select Done do go back to the main menu.
9. Don't forget to press the E key to end your editing.
The following example assumes RTE1 is empty. Follow the directions
in the Erasing an Existing Route section to start with an empty route
if you have waypoints in the RTE1 screen.
1. Select the RTE key until the RTE1 screen is displayed.
2. Press the E key to enter the edit mode.
3. Select Insert from the display. Skip to the next step if RTE1 is empty.
4. Select Insert new Waypoint from the display.
5. Choose either Bearing, Distance or Lat/Lon (Grid Point, or TD if
you are using other coordinate systems). Use the keypad to type in
the range and bearing from the previous waypoint (or present po-
sition in the case of the first waypoint) or the coordinates you want
and their appropriate description.
Operation & Installation Manual
8/13/01, 11:31 AM
35