Configuration; Alarms - Leica apMK12 Operation & Installation Manual

Configuration

Configuration

Alarms

Version 1.5
97
There is one CFG screen in the receiver during normal operation.
Additional configuration screens can be activated for special purposes,
as described in the Engineering Mode section for example. The CFG
screen includes setup and control of all of the receiver's primary func-
tions. There are more than 20 separate configuration items in this screen.
The display is divided into two windows. The left hand window iden-
tifies the primary configuration item. The right hand window displays
the current settings. Use the cursor key to select a configuration item
of interest, then press the E key to edit the actual settings. There are
some settings which can not be changed; however, these are displayed
so that you have a better understanding of exactly how the receiver is
configured. The Item list is arranged alphabetically based on the lan-
guage chosen. This section of the manual is arranged alphabetically
for English. You may choose to skip to only the items that interest you
at first, then read this complete section at a later time.
Note: This option lists is too long to display on one
page of the display. To be sure you have
viewed all of the configuration options, scroll
through to the bottom of each list with the
cursor key.
This screen allows you to quickly see which alarms are active and
inactive. The list of available alarms is interactive with the remaining
screens described in this section. Therefore, changing the state of the
alarm in a screen such as Anchor from Off to On will also cause the
anchor alarm in this screen to go from Off to On. Likewise, if you turn
the anchor alarm from On to Off in this screen the Anchor screen will
also match this one.
Operation & Installation Manual
8/13/01, 11:07 AM
97