Operation And Monitoring With Ozw772 - Siemens RDG400KN Basic Documentation

Note:
72 / 78
Siemens
Building Technologies
5.2.3

Operation and monitoring with OZW772

The OZW772 web server enables users to operate a Synco HVAC system from a
remote location – via PC or from a smart phone via the web. A start page shows
the most important data points. A combination of menu / path navigation enables
users to access all data points quickly and straightforwardly. The entire installation
can be visualized in the form of plant diagrams. Alarm and state messages can be
forwarded to different message receivers, such as e-mail, SMS, etc.
For details, see Commissioning Instructions CE1C5701.
5.2.4 Operation and monitoring with RMZ972
For details, see Basic Documentation CE1P3113.
The application cannot be displayed in the form of text, instead a number is used:
(Parameter Plant type on menu Basic setting):
0 = no application
1 = single duct
2 = single duct and electric heater
3 = single duct and radiator
4 = single duct and heating / cooling coil
RDG400KN Basic documentation
Supported KNX tools
The RMZ792 is a communicating operator unit
designed for operating Synco™ 700 and RDG
KNX devices in a KNX network.
The operator unit is suited both for fixed
installation and mobile use (e.g. for use by the
service engineer).
Third-party devices cannot be operated with it.
CE1P3192en
20 Jul 2010