Applications Overview - Siemens RDG400KN Basic Documentation

Application
Remote configuration
via commissioning tool (factory setting)
 Synco ACS
 ETS3 professional (planned)
Single-duct
 DC 0...10 V damper actuator
 3-position damper actuator
Single-duct with electric heater
 DC 0...10 V damper actuator and ON/OFF,
PWM or 3-position electric heater (P47 = 0)
 3-position damper actuator and
DC 0...10 V electric heater (P47 = 1)
Single-duct and radiator / floor heating
 DC 0...10 V damper actuator and ON/OFF,
PWM or 3-position radiator (P47 = 0)
 3-position damper actuator and
DC 0...10 V radiator (P47 = 1)
Single-duct heating and cooling coil
 DC 0...10 V damper actuator and ON/OFF,
PWM or 3-position heating and cooling
(P47 = 0)
 3-position damper actuator and
DC 0...10 V heating and cooling
(P47 = 1)
Note
24 / 78
Siemens
Building Technologies
3.4

Applications overview

The thermostats support the following applications, which can be configured using
the DIP switches at the rear of the unit or a commissioning tool.
DIP switches 1...3 need to be set to OFF (remote configuration, factory setting) to
select an application via commissioning tool. In this case the output signal type
needs to be set in ACS as well.
The tool offers the applications printed in bold text (basic applications).
(P47 = 0)
(P47 = 1)
Use P47 to change damper output from DC 0...10 V (factory setting) to 3-position
Use P46 to change valve output from ON/OFF (factory setting) to PWM
Use DIP switch 5 to change valve output from ON/OFF to 3-position
RDG400KN Basic documentation
Functions
YV
V V M M
YV
V V M M
YE
YV
V V M M
YR
YV
V V M M
Y1
(B1)
T
DIP switches
ON
OFF
1 2 3 4
T
B1
ON
OFF
1 2 3 4 5
T
B1
ON
OFF
1 2 3 4 5
T
B1
ON
OFF
1 2 3 4 5
T
(B1)
ON
OFF
1 2 3 4 5
CE1P3192en
20 Jul 2010
5