Supported Knx Tools - Siemens RDG400KN Basic Documentation

ETS3 Professional
Note!
STOP
Notes:
ACS Service
ACS Operating
Note!
STOP
68 / 78
Siemens
Building Technologies
5.

Supported KNX tools

5.1 ETS3 Professional
ETS3 Professional is an engineering tool. It is used to set up the communication of
the RDG KNX thermostat and assigns the communication object to group
addresses (S-mode).
Parameters are only used for choosing (making visible / hiding) the communication
objects.
This Manual does not describe how to operate ETS3 Professional and commission
a device. Refer to the KNX Manual for more details.
Setting RDG KNX parameters is only supported by ETS3f or higher.
5.1.1 Parameter settings in ETS Professional
For setting the parameters, open the project and select a device.
To start the parameter settings, select Edit, then Edit parameters.
 Parameters are only used to choose the communication objects
 The tool required is ETS3 Professional version 3f or higher!
5.2 ACS700 Service and Operating tool
With the ACS700 tools, the RDG KNX thermostats can be commissioned (physical
address, application, parameters). They can be operated or monitored via bus
during normal operation.
This Manual does not describe how the physical address is defined. Also, it only
gives a brief overview of the main functionality of ACS.
For more information, refer to the ACS online help.
Setting RDG KNX parameters is only supported by ACS700 Version 5.11 or
higher.
RDG400KN Basic documentation
Supported KNX tools
CE1P3192en
20 Jul 2010